Age | Commit message (Collapse) | Author |
|
It's slightly possible that this causes trivial build failures on different
configurations, but otherwise shouldn't cause any problems (i.e. no actual
changes other than include/naming/namespace stuff). I deliberately avoided
removing libardour-config.h since this can mysteriously break things, though a
few of those do seem to be unnecessary.
This commit only targets includes of ardour/*.h. There is also a very large
number of unnecessary includes of stuff in gtk2_ardour; tackling that should
also give a big improvement in build time when things are modified.
git-svn-id: svn://localhost/ardour2/branches/3.0@12420 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
general configure_io; fixes remainder of #4233.
git-svn-id: svn://localhost/ardour2/branches/3.0@10012 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@9288 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
new fixed meter point; clean up logic in Route::setup_invisible_processors() to correctly place meters and monitor sends in various modes
git-svn-id: svn://localhost/ardour2/branches/3.0@8923 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
left-channel-only metering (#3699).
git-svn-id: svn://localhost/ardour2/branches/3.0@8486 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@8166 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
rev 6981 (will need full testing in the 3.X context). as on 2.x, this removes real-time visual updates to automation curves during write/touch automation recording
git-svn-id: svn://localhost/ardour2/branches/3.0@7653 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@7337 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
and allow internal returns to be restored from XML in non-monitor busses
git-svn-id: svn://localhost/ardour2/branches/3.0@6917 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@6790 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@6393 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
connection scope, plus a few other related matters
git-svn-id: svn://localhost/ardour2/branches/3.0@6376 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
not finished yet, but compiles, loads sessions, records and can close a session without a crash
git-svn-id: svn://localhost/ardour2/branches/3.0@6372 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
takes a write lock on the processor list. this allows it to be called when setting rec-enable status on a route. not thoroughly tested, and still incomplete - single route rec-enables should probably use this pathway, and there is still no cross-thread cleanup from an RT route op request
git-svn-id: svn://localhost/ardour2/branches/3.0@6320 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
must leave
the passed-in buffers valid. In the case where the main outs delivery is the last
processor in a route, this is not necessary (and wasteful). If another processor
(e.g. a meter) follows the main outs, the passed-in (scratch) buffers must be valid
or the meter will get garbage data.
Fixes meters displaying phantom signals in some cases.
git-svn-id: svn://localhost/ardour2/branches/3.0@6180 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
is visible in the UI; hide main outs always
git-svn-id: svn://localhost/ardour2/branches/3.0@6126 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
mixing). Whitespace changes only.
Vimmers, try let c_space_errors = 1 in your .vimrc to highlight this kind of stuff in red. I don't know the emacs equivalent...
git-svn-id: svn://localhost/ardour2/branches/3.0@5773 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
speed-critical
code. Fixes mantis 2833.
git-svn-id: svn://localhost/ardour2/branches/3.0@5565 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@5403 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
delay for quit dialog
git-svn-id: svn://localhost/ardour2/branches/3.0@5402 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
work ; fixes from 2.X for key editor and untranslatable string; use standard name for surfaces lib version in wiimote wscript
git-svn-id: svn://localhost/ardour2/branches/3.0@5400 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
finish this audio routing thing...
git-svn-id: svn://localhost/ardour2/branches/3.0@5364 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
pay attention to active status in Amp, Meter and Delivery
git-svn-id: svn://localhost/ardour2/branches/3.0@5360 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
ardour without JACK. lots still to do, but at least the obvious works
git-svn-id: svn://localhost/ardour2/branches/3.0@5202 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
run_in_place() as run()
git-svn-id: svn://localhost/ardour2/branches/3.0@5155 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
or 2.X SESSIONS !!!! BREAKAGE IS EXPECTED !!!! IF YOU HAVE AND NEED A WORKING 3.0 DO **NOT** UPDATE. !!!! otherwise, update and enjoy the steadily emerging joys of this major reworking of ardour internals
git-svn-id: svn://localhost/ardour2/branches/3.0@5137 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
BREAKAGE STILL EXPECTED ; change all(?) methods that pass a start/end frame in to use sframes_t not nframes_t
git-svn-id: svn://localhost/ardour2/branches/3.0@5074 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
The vast majority of Route signal processing is now simply in the list of
processors. There are definitely regressions here, but there's also
a lot of things fixed. It's far too much work to let diverge anymore
regardless, so here it is.
The basic model is: A route has a fixed set of input channels (matching
its JACK input ports and diskstream). The first processor takes this
as input. The next processor is configured using the first processor's
output as input, and is allowed to choose whatever output it wants
given that input... and so on, and so on. Finally, the last processor's
requested output is used to set up the panner and create whatever Jack
ports are needed to output the data.
All 'special' internal processors (meter, fader, amp, insert, send) are
currently transparent: they read any input, and return the same set
of channels back (unmodified, except for amp).
User visible changes:
* LV2 Instrument support (tracks with both MIDI and audio channels)
* MIDI in/out plugin support
* Generic plugin replication (for MIDI plugins, MIDI/audio plugins)
* Movable meter point
Known Bugs:
* Things seem to get weird on loaded sessions
* Output delivery is sketchy
* 2.0 session loading was probably already broken...
but it's definitely broken now :)
Please test this and file bugs if you have any time...
git-svn-id: svn://localhost/ardour2/branches/3.0@5055 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@5042 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@5037 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
yes, really.
git-svn-id: svn://localhost/ardour2/branches/3.0@4999 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
All #include statements that include a header that is a part of a library
bundled with ardour MUST use quotes, not angle brackets.
Do this:
#include "ardour/types.h"
NOT this:
#include <ardour/types.h>
Rationale:
This is best practice in general, to ensure we include the local version
and not the system version. That quotes mean "local" (in some sense)
and angle brackets mean "system" (in some sense) is a ubiquitous
convention and IIRC right in the C spec somewhere.
More pragmatically, this is required by (my) waf (stuff) for dependencies
to work correctly. That is:
!!! FAILURE TO DO THIS CAN RESULT IN BROKEN BUILDS !!!
Failure to comply is punishable by death by torture. :)
P.S. It's not that dramatic in all cases, but this (in combination with some
GCC flags specific to the include type) is the best way I have found to be
absolutely 100% positive the local ones are being used (and we definitely
want to be absolutely 100% positive on that one).
git-svn-id: svn://localhost/ardour2/branches/3.0@4655 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
The time stamp of an event is now always tempo, from file to model and
back again. Frame time is only relevant at playback or recording time,
in the audio thread (MidiModel and MidiBuffer).
I think perhaps we don't need to change the actual time from double (which is
convenient for math), it is the time base conversion that caused problems.
Using a correct equality comparison (i.e. not == which is not correct for
floating point) should probably make the undo issues go away, in 99.99% of
cases anyway.
There's almost certainly some regressions in here somewhere, but they do not
seem to be time related. The bugs I'm hitting in testing are old ones that
seem unrelated now, so it's checkpoint time.
This sets us up for fancy things like tempo map import and tempo/meter changes
halfway through MIDI regions, but for now it's still assumed that the tempo
at the start of the region is valid for the duration of the entire region.
git-svn-id: svn://localhost/ardour2/branches/3.0@4582 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
MidiBuffer and MidiRingBuffer).
Use iterator interface of Sequence to read events in a MIDISource rather than Sequence::read, avoiding timestamp confusion.
Disable no longer useful Sequence::read.
git-svn-id: svn://localhost/ardour2/branches/3.0@4570 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@4473 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@4471 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
support connection of JACK ports with internal ones.
git-svn-id: svn://localhost/ardour2/branches/3.0@4417 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@4408 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@3826 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
Mostly fix MIDI track resizing wackiness (from torbenh).
git-svn-id: svn://localhost/ardour2/branches/3.0@3817 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@3814 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
Sane event type interface between evoral and libardour (no more shared magic numbers).
Cleanup Evoral::Sequence iterator, fix bugs, probably introduce new ones.
Move MIDI specific event functions to Evoral::MIDIEvent (is-a Evoral::Event).
git-svn-id: svn://localhost/ardour2/branches/3.0@3785 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
Anything related to the storage of events/values over a range of time lives in evoral.
This includes MidiModel (Evoral::Sequence) and automation data (AutomationList (Evoral::ControlList),
Automatable (Evoral::ControlSet), etc).
libs/evoral synced with http://svn.drobilla.net/lad/trunk/evoral r1511.
git-svn-id: svn://localhost/ardour2/branches/3.0@3754 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@3711 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@3435 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/branches/3.0@3432 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
move ARDOUR::MidiEvent into MIDI namespace along with midi_events.h header
git-svn-id: svn://localhost/ardour2/branches/3.0@3155 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/trunk@2883 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
git-svn-id: svn://localhost/ardour2/trunk@2714 d708f5d6-7413-0410-9779-e7cbd77b26cf
|
|
future purposes).
Fix MIDI recording crash bug.
git-svn-id: svn://localhost/ardour2/trunk@2228 d708f5d6-7413-0410-9779-e7cbd77b26cf
|