diff options
Diffstat (limited to 'manual/xml/exporting_to_cd.xml')
-rw-r--r-- | manual/xml/exporting_to_cd.xml | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/manual/xml/exporting_to_cd.xml b/manual/xml/exporting_to_cd.xml new file mode 100644 index 0000000000..2042e29c2e --- /dev/null +++ b/manual/xml/exporting_to_cd.xml @@ -0,0 +1,190 @@ +<?xml version="1.0" standalone="no"?> + +<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [ + +]> + +<section id="sn-exporting-to-cd"> + <sectioninfo> + <authorgroup> + <author> + <personname> + <firstname>Nick</firstname> + <surname>Mainsbridge</surname> + </personname> + </author> + </authorgroup> + </sectioninfo> + <title>Exporting to CD</title> + <section id="table-of-contents"> + <title>Table of Contents </title> + <para> + A Table of Contents is a description of the data stored on a medium. + In the case of audio Cds, the TOC comes in the form of PQ data which + is intermingled with the audio data whaen the CD is burnt. Because PQ + data isn't part of 'normal' audio file formats such as wav or aiff, + this information must be stored in a separate file on your computer (a + CUE or TOC file) ready for use by your CD burning software which will + combine the two. + </para> + + <para> + At the moment, Ardour can export TOC and CUE files containing the + red-book related fields Track, Index, ISRC, SCMS and Preemphasis. The + CD-TEXT fields TITLE, COMPOSER, PERFORMER and disc title are also + supported. + </para> + + <para> + Range markers in Ardour can be 'promoted' to become CD tracks in the + locations window. Marks (point markers) can be promoted to be CD + Indexes in the same window. All TOC/CUE export operations hinge on + this. + </para> + + <para> + Assuming you have several songs on your timeline laid out so that + their spacing and level is 'correct' as you hear it, you should then + set ranges that represent the start and end points of each track, + These will become the start and end points on your CD. The start times + are all rounded down to the previous CD frame (Of which there are + 75/second) on export, so if you want to hear the exact point that your + CD player will start from, select 'CD frames' as your snap setting + while you do this. If you want track indexes (nobody does, but they're + there), set a location marker for each desired index. + </para> + + <para> + The locations dialog is useful here, as you can just 'go' to a point + to audition the exact position of a marker/range. + </para> + </section> + + <section id="pregap"> + <title> Pregap </title> + <para> + A word about pregap: + </para> + + <para> + A 'normal' redbook CD should have a blank (digital black) space of 2 + seconds before the first modulation called the pregap. Ideally, your + first song will have been placed at 2 seconds when you began, but you + can always drag the whole collection of songs to the right position + fairly easily at this point. + </para> + + <para> + Also, note that this 2 second rule can be fun to break. You can make + the pregap as long as you like.. even hide whole songs in there. The + player will still play track one when the disc is inserted. Only those + listeners with the urge to rewind beyond the beginning will find your + hidden song/dog bark. Also keep in mind that there is a pregap for + each song. It starts where the previous song ends. In other words, if + you leave a gap in the ranges between songs 2 & 3, that gap will + only play for those listening through the entire CD. Anyone skipping + directly to 3 will miss your secret 'long' intro. + </para> + + <para> + After setting a non-overlapping range for each track (overlapping CD + tracks are removed on export, from left to right, as are indexes that + aren't inside a track), open the locations window and make your ranges + into track markers by clicking the CD button. Fill in whatever + information you feel is necessary in the boxes below. Unused fields + will be ignored as far as the exported TOC/CUE file is concerned. + </para> + + <para> + CD-TEXT track titles are taken from the range's name. The CD-TEXT + title of the CD is taken from the session name (i should have told you + that first, right?). + </para> + + <note> + <para> + Pre-emphasis is there for those strange types that use it (they also + use track indexes). You almost certainly don't want pre-emphasis. A + valid ISRC is all capitals, 12 characters. + </para> + </note> + </section> + + <section id="cue-files"> + <title> Cue Files </title> + <para> + Cue files have no notion of 'the end'. Its a drag. They think the end + of the file is the end of the last track. If you want to use CUE + files, you have to make sure that the session end marker is snapped to + CD frames (before you export, of course), or else use the -pad option + when you burn. + </para> + </section> + + <section id="export-the-session"> + <title> Export The Session </title> + <para> + Now export the session to a file (16bit 44.1kHz for CD), selecting + your preferred cuefile type (TOC or CUE). The TOC/CUE file is written + to the same directory as your audio file, and has the same name, only + with '.toc' or '.cue' appended. Usually you will only be selecting the + two master outputs to export, with output 1 always being 'left'. The + export is post fader and panner. Don't assume that the sound will be + identical after you have truncated/dithered to 16 bits. It can be + worthwhile to experiment with different dither settings when making + your export. + </para> + + <para> + To check out the details without burning + </para> +<screen> +cdrdao show-toc blah.wav.toc +</screen> + <para> + to correct a problem, make your changes, then use the 'export toc file + only' option. If you have to change the session end marker, you'll + have to re-export your audio file. + </para> + + <para> + To burn + </para> +<screen> +cdrdao write /home/britney/globalsmash.wav.toc +</screen> + <para> + One last thing: + </para> + + <para> + If you don't make any CD Track ranges and export a TOC/CUE file, the + entire session is treated as one track with no pregap. Indexes, if + present, will be honoured. + </para> + </section> + + <section id="ddp-support"> + <title>FAQ </title> + <para> + Why no DDP? ( http://www.dcainc.com/products/ddp/ ) + </para> + + <para> + A: DCA have been kind enough to get in touch. Hopefully they will + allow a GPL implementaton soon. + </para> + </section> + + <section id="catalog-numbers"> + <title>What about catalog numbers for the CD?</title> + <para> + A: coming eventually.. we need a tab for session-wide variables like + these. where to put it? in the export dialog or the options menu? + </para> + </section> +<!-- + <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" + href="Some_Subsection.xml" /> + --> +</section> |