diff options
-rw-r--r-- | manual/xml/mackie.xml | 371 |
1 files changed, 196 insertions, 175 deletions
diff --git a/manual/xml/mackie.xml b/manual/xml/mackie.xml index 6917b261c2..e02158f6f3 100644 --- a/manual/xml/mackie.xml +++ b/manual/xml/mackie.xml @@ -8,16 +8,18 @@ <title>Using the Mackie driver for MCU and BCF2000</title> <para> This will walk you through the process of configuring and using Mackie - MCU, or a BCF2000 in <ulink url="http://www.behringerdownload.de/BCF2000/BCF2000_Emulation_modes.pdf">Logic Control emulation mode</ulink>. + MCU, or a BCF2000 in + <ulink url="http://www.behringerdownload.de/BCF2000/BCF2000_Emulation_modes.pdf">Logic + Control emulation mode</ulink>. </para> <section id="mackie-connecting-device"> <title>Connecting Device</title> <para> - Make sure your surface is connected and you know which <filename>/dev/snd/midi</filename> - entry belongs to the device. You can do this by saying - <command>cat /proc/asound/cards</command> - which should result in something like + Make sure your surface is connected and you know which + <filename>/dev/snd/midi</filename> entry belongs to the device. You + can do this by saying <command>cat /proc/asound/cards</command> which + should result in something like <screen> 0 [EWS88MT ]: ICE1712 - TerraTec EWS88MT TerraTec EWS88MT at 0x1140, irq 21 @@ -26,198 +28,217 @@ 2 [BCF2000 ]: USB-Audio - BCF2000 BEHRINGER BCF2000 at usb-0000:00:1a.1-1, full speed </screen> - in this case the BCF2000 is on <filename>/dev/snd/midiC2D0</filename>. - </para> + in this case the BCF2000 is on <filename>/dev/snd/midiC2D0</filename>. + </para> + <para> - While ardour is not running, edit your <filename>.ardour2/ardour.rc</filename> and add at the top, with - the other ports: + While ardour is not running, edit your + <filename>.ardour2/ardour.rc</filename> and add at the top, with the + other ports: <programlisting> <MIDI-port tag="mcu" device="/dev/snd/midiC2D0" type="alsa/raw" mode="duplex"/> </programlisting> - If you have a BCF2000, and you'd like to use <link linkend="mackie-bcf-mode">BCF mode</link>, - you can also add under the <Config> tag: + If you have a BCF2000, and you'd like to use + <link linkend="mackie-bcf-mode">BCF mode</link>, you can also add + under the <Config> tag: <programlisting> <Option name="mackie-emulation" value="bcf"/> </programlisting> - </para> - <para> - It is also possible to add MCU extenders, although this is untested - because nobody we know has access to one right now. To do this, add - the following lines to <filename>~/.ardour2/ardour.rc</filename> + + <para> + It is also possible to add MCU extenders, although this is untested + because nobody we know has access to one right now. To do this, add + the following lines to <filename>~/.ardour2/ardour.rc</filename> <programlisting> <MIDI-port tag="mcu_xt_1" device="/dev/snd/midiC3D0" type="alsa/raw" mode="duplex"/> <MIDI-port tag="mcu_xt_2" device="/dev/snd/midiC4D0" type="alsa/raw" mode="duplex"/> </programlisting> - and so on, one for each of your extenders, up to a maximum of 9 extenders. - </para> + and so on, one for each of your extenders, up to a maximum of 9 + extenders. + </para> </section> <section id="mackie-connecting-to-ardour"> <title>Connecting to Ardour</title> <para> - Start up ardour. Go to Options/Control Surfaces. You should see "Mackie" - as one of the menu items. Turn it on. The faders on the surface should - jump to the correct positions. The mackie should work as normal, except - that any buttons not on the BCF won't work. + Start up ardour. Go to Options/Control Surfaces. You should see + "Mackie" as one of the menu items. Turn it on. The faders on the + surface should jump to the correct positions. The mackie should work + as normal, except that any buttons not on the BCF won't work. </para> - </section> + </section> <section id="mackie-bcf-mode"> <title>BCF mode</title> - <para> - <itemizedlist> - <listitem> - <para> - 7 of the 8 sliders are used as route sliders, the - remaining right-hand one is used for the master slider - </para> - </listitem> - <listitem> - <para> - certain buttons have been remapped from the default Behringer - settings, which required either both hands, or one-handed contortions - to do simple things like rec-enable or mute a track. - </para> - </listitem> - <listitem> - <para> - The display shows the number of the first switched-in bank - or Ar if the first bank is in place. - </para> - </listitem> - </itemizedlist> - </para> - - <para> - BCF mode bindings - <table id="tbl-mackie-bcf-key-bindings"> - <title>BCF mode bindings</title> - <tgroup cols = "4"> - <colspec colnum="1" colname="Strip" colwidth="1"/> - <colspec colnum="2" colname="Master Strip" colwidth= "1"/> - <colspec colnum="3" colname="Buttons 1" colwidth="1"/> - <colspec colnum="4" colname="Buttons 2" colwidth= "1"/> - <thead> - <row> - <entry> - Strips 1-7 - </entry> - <entry> - Master Strip - </entry> - <entry namest="Buttons 1" nameend="Buttons 2"> - Buttons - </entry> - </row> - </thead> - <tbody> - <row> - <entry> - pan / solo if pressed - </entry> - <entry> - transport - <footnote> - <para> - Making a pot pretend to be a shuttle wheel doesn't work very well. - </para> - </footnote> - / nothing - </entry> - <entry namest="Buttons 1" nameend="Buttons 2"> - LCD display - </entry> - </row> - - <row> - <entry> - mute - </entry> - <entry> - mute - </entry> - <entry> - shift 1 - </entry> - <entry> - loop - </entry> - </row> - - <row> - <entry> - rec - </entry> - <entry> - session rec - </entry> - <entry> - shift 2 - </entry> - <entry> - click - </entry> - </row> - - <row> - <entry morerows="4" valign="middle"> - slider - </entry> - <entry morerows="4" valign="middle"> - slider - </entry> - <entry> - punch in - </entry> - <entry> - punch out - </entry> - </row> - - <row> - <entry> - home - </entry> - <entry> - end - </entry> - </row> - - <row> - <entry> - previous bank - (shift 1 is previous route) - </entry> - <entry> - next bank - (shift 1 is next route) - </entry> - </row> - - <row> - <entry> - previous marker - </entry> - <entry> - next marker - </entry> - </row> - - <row> - <entry> - stop - </entry> - <entry> - play - </entry> - </row> - </tbody> - </tgroup> - </table> - </para> - </section> + <para> + <itemizedlist> + <listitem> + <para> + 7 of the 8 sliders are used as route sliders, the remaining + right-hand one is used for the master slider + </para> + </listitem> + + <listitem> + <para> + certain buttons have been remapped from the default Behringer + settings, which required either both hands, or one-handed + contortions to do simple things like rec-enable or mute a track. + </para> + </listitem> + + <listitem> + <para> + The display shows the number of the first switched-in bank or Ar + if the first bank is in place. + </para> + </listitem> + </itemizedlist> + </para> + + <para> + BCF mode bindings + <table id="tbl-mackie-bcf-key-bindings"> + <title>BCF mode bindings</title> + <tgroup cols = "4"> + <colspec colnum="1" colname="Strip" colwidth="1"/> + <colspec colnum="2" colname="Master Strip" colwidth= "1"/> + <colspec colnum="3" colname="Buttons 1" colwidth="1"/> + <colspec colnum="4" colname="Buttons 2" colwidth= "1"/> + <thead> + <row> + <entry> + Strips 1-7 + </entry> + + <entry> + Master Strip + </entry> + + <entry namest="Buttons 1" nameend="Buttons 2"> + Buttons + </entry> + </row> + </thead> + <tbody> + <row> + <entry> + pan / solo if pressed + </entry> + + <entry> + transport <footnote> + <para> + Making a pot pretend to be a shuttle wheel doesn't work + very well. + </para> + </footnote> / nothing + </entry> + + <entry namest="Buttons 1" nameend="Buttons 2"> + LCD display + </entry> + </row> + + <row> + <entry> + mute + </entry> + + <entry> + mute + </entry> + + <entry> + shift 1 + </entry> + <entry> + loop + </entry> + </row> + + <row> + <entry> + rec + </entry> + + <entry> + session rec + </entry> + + <entry> + shift 2 + </entry> + + <entry> + click + </entry> + </row> + + <row> + <entry morerows="4" valign="middle"> + slider + </entry> + + <entry morerows="4" valign="middle"> + slider + </entry> + + <entry> + punch in + </entry> + + <entry> + punch out + </entry> + </row> + + <row> + <entry> + home + </entry> + + <entry> + end + </entry> + </row> + + <row> + <entry> + previous bank (shift 1 is previous route) + </entry> + + <entry> + next bank (shift 1 is next route) + </entry> + </row> + + <row> + <entry> + previous marker + </entry> + + <entry> + next marker + </entry> + </row> + + <row> + <entry> + stop + </entry> + + <entry> + play + </entry> + </row> + </tbody> + </tgroup> + </table> + </para> + </section> <!-- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="Some_Subsection.xml" /> |