From 4601066bb4f213534140287e70e186631b537eb2 Mon Sep 17 00:00:00 2001 From: Tim Mayberry Date: Mon, 19 Mar 2007 02:51:23 +0000 Subject: Formatting changes to mackie.xml as a result of running make format git-svn-id: svn://localhost/ardour2/trunk@1621 d708f5d6-7413-0410-9779-e7cbd77b26cf --- manual/xml/mackie.xml | 371 ++++++++++++++++++++++++++------------------------ 1 file changed, 196 insertions(+), 175 deletions(-) (limited to 'manual/xml') diff --git a/manual/xml/mackie.xml b/manual/xml/mackie.xml index 6917b261c2..e02158f6f3 100644 --- a/manual/xml/mackie.xml +++ b/manual/xml/mackie.xml @@ -8,16 +8,18 @@ Using the Mackie driver for MCU and BCF2000 This will walk you through the process of configuring and using Mackie - MCU, or a BCF2000 in Logic Control emulation mode. + MCU, or a BCF2000 in + Logic + Control emulation mode.
Connecting Device - Make sure your surface is connected and you know which /dev/snd/midi - entry belongs to the device. You can do this by saying - cat /proc/asound/cards - which should result in something like + Make sure your surface is connected and you know which + /dev/snd/midi entry belongs to the device. You + can do this by saying cat /proc/asound/cards which + should result in something like 0 [EWS88MT ]: ICE1712 - TerraTec EWS88MT TerraTec EWS88MT at 0x1140, irq 21 @@ -26,198 +28,217 @@ 2 [BCF2000 ]: USB-Audio - BCF2000 BEHRINGER BCF2000 at usb-0000:00:1a.1-1, full speed - in this case the BCF2000 is on /dev/snd/midiC2D0. - + in this case the BCF2000 is on /dev/snd/midiC2D0. + + - While ardour is not running, edit your .ardour2/ardour.rc and add at the top, with - the other ports: + While ardour is not running, edit your + .ardour2/ardour.rc and add at the top, with the + other ports: <MIDI-port tag="mcu" device="/dev/snd/midiC2D0" type="alsa/raw" mode="duplex"/> - If you have a BCF2000, and you'd like to use BCF mode, - you can also add under the <Config> tag: + If you have a BCF2000, and you'd like to use + BCF mode, you can also add + under the <Config> tag: <Option name="mackie-emulation" value="bcf"/> - - - It is also possible to add MCU extenders, although this is untested - because nobody we know has access to one right now. To do this, add - the following lines to ~/.ardour2/ardour.rc + + + It is also possible to add MCU extenders, although this is untested + because nobody we know has access to one right now. To do this, add + the following lines to ~/.ardour2/ardour.rc <MIDI-port tag="mcu_xt_1" device="/dev/snd/midiC3D0" type="alsa/raw" mode="duplex"/> <MIDI-port tag="mcu_xt_2" device="/dev/snd/midiC4D0" type="alsa/raw" mode="duplex"/> - and so on, one for each of your extenders, up to a maximum of 9 extenders. - + and so on, one for each of your extenders, up to a maximum of 9 + extenders. +
Connecting to Ardour - Start up ardour. Go to Options/Control Surfaces. You should see "Mackie" - as one of the menu items. Turn it on. The faders on the surface should - jump to the correct positions. The mackie should work as normal, except - that any buttons not on the BCF won't work. + Start up ardour. Go to Options/Control Surfaces. You should see + "Mackie" as one of the menu items. Turn it on. The faders on the + surface should jump to the correct positions. The mackie should work + as normal, except that any buttons not on the BCF won't work. -
+
BCF mode - - - - - 7 of the 8 sliders are used as route sliders, the - remaining right-hand one is used for the master slider - - - - - certain buttons have been remapped from the default Behringer - settings, which required either both hands, or one-handed contortions - to do simple things like rec-enable or mute a track. - - - - - The display shows the number of the first switched-in bank - or Ar if the first bank is in place. - - - - - - - BCF mode bindings - - BCF mode bindings - - - - - - - - - Strips 1-7 - - - Master Strip - - - Buttons - - - - - - - pan / solo if pressed - - - transport - - - Making a pot pretend to be a shuttle wheel doesn't work very well. - - - / nothing - - - LCD display - - - - - - mute - - - mute - - - shift 1 - - - loop - - - - - - rec - - - session rec - - - shift 2 - - - click - - - - - - slider - - - slider - - - punch in - - - punch out - - - - - - home - - - end - - - - - - previous bank - (shift 1 is previous route) - - - next bank - (shift 1 is next route) - - - - - - previous marker - - - next marker - - - - - - stop - - - play - - - - -
- -
+ + + + + 7 of the 8 sliders are used as route sliders, the remaining + right-hand one is used for the master slider + + + + + + certain buttons have been remapped from the default Behringer + settings, which required either both hands, or one-handed + contortions to do simple things like rec-enable or mute a track. + + + + + + The display shows the number of the first switched-in bank or Ar + if the first bank is in place. + + + + + + + BCF mode bindings + + BCF mode bindings + + + + + + + + + Strips 1-7 + + + + Master Strip + + + + Buttons + + + + + + + pan / solo if pressed + + + + transport + + Making a pot pretend to be a shuttle wheel doesn't work + very well. + + / nothing + + + + LCD display + + + + + + mute + + + + mute + + + + shift 1 + + + loop + + + + + + rec + + + + session rec + + + + shift 2 + + + + click + + + + + + slider + + + + slider + + + + punch in + + + + punch out + + + + + + home + + + + end + + + + + + previous bank (shift 1 is previous route) + + + + next bank (shift 1 is next route) + + + + + + previous marker + + + + next marker + + + + + + stop + + + + play + + + + +
+ +