/* Copyright (C) 1999-2002 Paul Davis This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include #include #include #include "midi++/mmc.h" #include "midi++/port.h" #include "midi++/manager.h" #include "pbd/error.h" #include "pbd/pthread_utils.h" #include "timecode/time.h" #include "ardour/audio_track.h" #include "ardour/audioengine.h" #include "ardour/debug.h" #include "ardour/midi_track.h" #include "ardour/midi_ui.h" #include "ardour/session.h" #include "ardour/slave.h" #include "i18n.h" using namespace std; using namespace ARDOUR; using namespace PBD; using namespace MIDI; using namespace Glib; void Session::midi_panic() { { boost::shared_ptr r = routes.reader (); for (RouteList::iterator i = r->begin(); i != r->end(); ++i) { MidiTrack *track = dynamic_cast((*i).get()); if (track != 0) { track->midi_panic(); } } } } void Session::setup_midi_control () { outbound_mtc_timecode_frame = 0; next_quarter_frame_to_send = 0; /* Set up the qtr frame message */ mtc_msg[0] = 0xf1; mtc_msg[2] = 0xf1; mtc_msg[4] = 0xf1; mtc_msg[6] = 0xf1; mtc_msg[8] = 0xf1; mtc_msg[10] = 0xf1; mtc_msg[12] = 0xf1; mtc_msg[14] = 0xf1; } void Session::spp_start () { if (Config->get_mmc_control ()) { request_transport_speed (1.0); } } void Session::spp_continue () { spp_start (); } void Session::spp_stop () { if (Config->get_mmc_control ()) { request_stop (); } } void Session::mmc_deferred_play (MIDI::MachineControl &/*mmc*/) { if (Config->get_mmc_control ()) { request_transport_speed (1.0); } } void Session::mmc_record_pause (MIDI::MachineControl &/*mmc*/) { if (Config->get_mmc_control ()) { maybe_enable_record(); } } void Session::mmc_record_strobe (MIDI::MachineControl &/*mmc*/) { if (!Config->get_mmc_control() || (_step_editors > 0)) { return; } /* record strobe does an implicit "Play" command */ if (_transport_speed != 1.0) { /* start_transport() will move from Enabled->Recording, so we don't need to do anything here except enable recording. its not the same as maybe_enable_record() though, because that *can* switch to Recording, which we do not want. */ save_state ("", true); g_atomic_int_set (&_record_status, Enabled); RecordStateChanged (); /* EMIT SIGNAL */ request_transport_speed (1.0); } else { enable_record (); } } void Session::mmc_record_exit (MIDI::MachineControl &/*mmc*/) { if (Config->get_mmc_control ()) { disable_record (false); } } void Session::mmc_stop (MIDI::MachineControl &/*mmc*/) { if (Config->get_mmc_control ()) { request_stop (); } } void Session::mmc_pause (MIDI::MachineControl &/*mmc*/) { if (Config->get_mmc_control ()) { /* We support RECORD_PAUSE, so the spec says that we must interpret PAUSE like RECORD_PAUSE if recording. */ if (actively_recording()) { maybe_enable_record (); } else { request_stop (); } } } static bool step_queued = false; void Session::mmc_step (MIDI::MachineControl &/*mmc*/, int steps) { if (!Config->get_mmc_control ()) { return; } struct timeval now; struct timeval diff = { 0, 0 }; gettimeofday (&now, 0); timersub (&now, &last_mmc_step, &diff); gettimeofday (&now, 0); timersub (&now, &last_mmc_step, &diff); if (last_mmc_step.tv_sec != 0 && (diff.tv_usec + (diff.tv_sec * 1000000)) < _engine.usecs_per_cycle()) { return; } double diff_secs = diff.tv_sec + (diff.tv_usec / 1000000.0); double cur_speed = (((steps * 0.5) * timecode_frames_per_second()) / diff_secs) / timecode_frames_per_second(); if (_transport_speed == 0 || cur_speed * _transport_speed < 0) { /* change direction */ step_speed = cur_speed; } else { step_speed = (0.6 * step_speed) + (0.4 * cur_speed); } step_speed *= 0.25; #if 0 cerr << "delta = " << diff_secs << " ct = " << _transport_speed << " steps = " << steps << " new speed = " << cur_speed << " speed = " << step_speed << endl; #endif request_transport_speed_nonzero (step_speed); last_mmc_step = now; if (!step_queued) { if (midi_control_ui) { RefPtr tsrc = TimeoutSource::create (100); tsrc->connect (sigc::mem_fun (*this, &Session::mmc_step_timeout)); tsrc->attach (midi_control_ui->main_loop()->get_context()); step_queued = true; } } } void Session::mmc_rewind (MIDI::MachineControl &/*mmc*/) { if (Config->get_mmc_control ()) { request_transport_speed(-8.0f); } } void Session::mmc_fast_forward (MIDI::MachineControl &/*mmc*/) { if (Config->get_mmc_control ()) { request_transport_speed(8.0f); } } void Session::mmc_locate (MIDI::MachineControl &/*mmc*/, const MIDI::byte* mmc_tc) { if (!Config->get_mmc_control ()) { return; } framepos_t target_frame; Timecode::Time timecode; timecode.hours = mmc_tc[0] & 0xf; timecode.minutes = mmc_tc[1]; timecode.seconds = mmc_tc[2]; timecode.frames = mmc_tc[3]; timecode.rate = timecode_frames_per_second(); timecode.drop = timecode_drop_frames(); // Also takes timecode offset into account: timecode_to_sample( timecode, target_frame, true /* use_offset */, false /* use_subframes */ ); if (target_frame > max_framepos) { target_frame = max_framepos; } /* Some (all?) MTC/MMC devices do not send a full MTC frame at the end of a locate, instead sending only an MMC locate command. This causes the current position of an MTC slave to become out of date. Catch this. */ MTC_Slave* mtcs = dynamic_cast (_slave); if (mtcs != 0) { // cerr << "Locate *with* MTC slave\n"; mtcs->handle_locate (mmc_tc); } else { // cerr << "Locate without MTC slave\n"; request_locate (target_frame, false); } } void Session::mmc_shuttle (MIDI::MachineControl &/*mmc*/, float speed, bool forw) { if (!Config->get_mmc_control ()) { return; } if (Config->get_shuttle_speed_threshold() >= 0 && speed > Config->get_shuttle_speed_threshold()) { speed *= Config->get_shuttle_speed_factor(); } if (forw) { request_transport_speed_nonzero (speed); } else { request_transport_speed_nonzero (-speed); } } void Session::mmc_record_enable (MIDI::MachineControl &mmc, size_t trk, bool enabled) { if (!Config->get_mmc_control ()) { return; } RouteList::iterator i; boost::shared_ptr r = routes.reader(); for (i = r->begin(); i != r->end(); ++i) { AudioTrack *at; if ((at = dynamic_cast((*i).get())) != 0) { if (trk == at->remote_control_id()) { at->set_record_enabled (enabled, &mmc); break; } } } } /** Send MTC Full Frame message (complete Timecode time) for the start of this cycle. * This resets the MTC code, the next quarter frame message that is sent will be * the first one with the beginning of this cycle as the new start point. * @param t time to send. */ int Session::send_full_time_code (framepos_t const t) { /* This function could easily send at a given frame offset, but would * that be useful? Does ardour do sub-block accurate locating? [DR] */ MIDI::byte msg[10]; Timecode::Time timecode; _send_timecode_update = false; if (_engine.freewheeling() || !Config->get_send_mtc() || _slave) { return 0; } // Get timecode time for the given time sample_to_timecode (t, timecode, true /* use_offset */, false /* no subframes */); transmitting_timecode_time = timecode; outbound_mtc_timecode_frame = t; // I don't understand this bit yet.. [DR] if (((mtc_timecode_bits >> 5) != MIDI::MTC_25_FPS) && (transmitting_timecode_time.frames % 2)) { // start MTC quarter frame transmission on an even frame Timecode::increment (transmitting_timecode_time, config.get_subframes_per_frame()); outbound_mtc_timecode_frame += _frames_per_timecode_frame; } // Compensate for audio latency outbound_mtc_timecode_frame += worst_playback_latency(); next_quarter_frame_to_send = 0; // Sync slave to the same Timecode time as we are on msg[0] = 0xf0; msg[1] = 0x7f; msg[2] = 0x7f; msg[3] = 0x1; msg[4] = 0x1; msg[9] = 0xf7; msg[5] = mtc_timecode_bits | timecode.hours; msg[6] = timecode.minutes; msg[7] = timecode.seconds; msg[8] = timecode.frames; // Send message at offset 0, sent time is for the start of this cycle if (MIDI::Manager::instance()->mtc_output_port()->midimsg (msg, sizeof (msg), 0)) { error << _("Session: could not send full MIDI time code") << endmsg; return -1; } _pframes_since_last_mtc = 0; return 0; } /** Send MTC (quarter-frame) messages for this cycle. * Must be called exactly once per cycle from the process thread. Realtime safe. * This function assumes the state of full Timecode is sane, eg. the slave is * expecting quarter frame messages and has the right frame of reference (any * full MTC Timecode time messages that needed to be sent should have been sent * earlier already this cycle by send_full_time_code) */ int Session::send_midi_time_code_for_cycle (framepos_t start_frame, framepos_t end_frame, pframes_t nframes) { // XXX only if _slave == MTC_slave; we could generate MTC from jack or LTC if (_engine.freewheeling() || _slave || !_send_qf_mtc || transmitting_timecode_time.negative || (next_quarter_frame_to_send < 0)) { // cerr << "(MTC) Not sending MTC\n"; return 0; } assert (next_quarter_frame_to_send >= 0); assert (next_quarter_frame_to_send <= 7); /* Duration of one quarter frame */ framecnt_t const quarter_frame_duration = ((framecnt_t) _frames_per_timecode_frame) >> 2; DEBUG_TRACE (DEBUG::MTC, string_compose ("TF %1 SF %2 NQ %3 FD %4\n", start_frame, outbound_mtc_timecode_frame, next_quarter_frame_to_send, quarter_frame_duration)); assert ((outbound_mtc_timecode_frame + (next_quarter_frame_to_send * quarter_frame_duration)) >= _transport_frame); /* Send quarter frames for this cycle */ while (end_frame > (outbound_mtc_timecode_frame + (next_quarter_frame_to_send * quarter_frame_duration))) { DEBUG_TRACE (DEBUG::MTC, string_compose ("next frame to send: %1\n", next_quarter_frame_to_send)); switch (next_quarter_frame_to_send) { case 0: mtc_msg[1] = 0x00 | (transmitting_timecode_time.frames & 0xf); break; case 1: mtc_msg[1] = 0x10 | ((transmitting_timecode_time.frames & 0xf0) >> 4); break; case 2: mtc_msg[1] = 0x20 | (transmitting_timecode_time.seconds & 0xf); break; case 3: mtc_msg[1] = 0x30 | ((transmitting_timecode_time.seconds & 0xf0) >> 4); break; case 4: mtc_msg[1] = 0x40 | (transmitting_timecode_time.minutes & 0xf); break; case 5: mtc_msg[1] = 0x50 | ((transmitting_timecode_time.minutes & 0xf0) >> 4); break; case 6: mtc_msg[1] = 0x60 | ((mtc_timecode_bits | transmitting_timecode_time.hours) & 0xf); break; case 7: mtc_msg[1] = 0x70 | (((mtc_timecode_bits | transmitting_timecode_time.hours) & 0xf0) >> 4); break; } const framepos_t msg_time = outbound_mtc_timecode_frame + (quarter_frame_duration * next_quarter_frame_to_send); // This message must fall within this block or something is broken assert (msg_time >= start_frame); assert (msg_time < end_frame); /* convert from session frames back to JACK frames using the transport speed */ pframes_t const out_stamp = (msg_time - start_frame) / _transport_speed; assert (out_stamp < nframes); if (MIDI::Manager::instance()->mtc_output_port()->midimsg (mtc_msg, 2, out_stamp)) { error << string_compose(_("Session: cannot send quarter-frame MTC message (%1)"), strerror (errno)) << endmsg; return -1; } #ifndef NDEBUG DEBUG_STR_DECL(foo) DEBUG_STR_APPEND(foo,"sending "); DEBUG_STR_APPEND(foo, transmitting_timecode_time); DEBUG_TRACE (DEBUG::MTC, string_compose ("%1 qfm = %2, stamp = %3\n", DEBUG_STR(foo).str(), next_quarter_frame_to_send, out_stamp)); #endif // Increment quarter frame counter next_quarter_frame_to_send++; if (next_quarter_frame_to_send >= 8) { // Wrap quarter frame counter next_quarter_frame_to_send = 0; // Increment timecode time twice Timecode::increment (transmitting_timecode_time, config.get_subframes_per_frame()); Timecode::increment (transmitting_timecode_time, config.get_subframes_per_frame()); // Re-calculate timing of first quarter frame //timecode_to_sample( transmitting_timecode_time, outbound_mtc_timecode_frame, true /* use_offset */, false ); outbound_mtc_timecode_frame += 8 * quarter_frame_duration; } } return 0; } /*********************************************************************** OUTBOUND MMC STUFF **********************************************************************/ bool Session::mmc_step_timeout () { struct timeval now; struct timeval diff; double diff_usecs; gettimeofday (&now, 0); timersub (&now, &last_mmc_step, &diff); diff_usecs = diff.tv_sec * 1000000 + diff.tv_usec; if (diff_usecs > 1000000.0 || fabs (_transport_speed) < 0.0000001) { /* too long or too slow, stop transport */ request_transport_speed (0.0); step_queued = false; return false; } if (diff_usecs < 250000.0) { /* too short, just keep going */ return true; } /* slow it down */ request_transport_speed_nonzero (_transport_speed * 0.75); return true; } int Session::start_midi_thread () { midi_control_ui = new MidiControlUI (*this); midi_control_ui->run (); return 0; }