/* Copyright (C) 2000-2003 Paul Davis This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "i18n.h" #include using namespace std; using namespace ARDOUR; using namespace PBD; MidiDiskstream::MidiDiskstream (Session &sess, const string &name, Diskstream::Flag flag) : Diskstream(sess, name, flag) , _playback_buf(0) , _capture_buf(0) //, _current_playback_buffer(0) //, _current_capture_buffer(0) //, _playback_wrap_buffer(0) //, _capture_wrap_buffer(0) , _source_port(0) , _capture_transition_buf(0) , _last_flush_frame(0) { /* prevent any write sources from being created */ in_set_state = true; init(flag); use_new_playlist (); in_set_state = false; assert(!destructive()); } MidiDiskstream::MidiDiskstream (Session& sess, const XMLNode& node) : Diskstream(sess, node) , _playback_buf(0) , _capture_buf(0) //, _current_playback_buffer(0) //, _current_capture_buffer(0) //, _playback_wrap_buffer(0) //, _capture_wrap_buffer(0) , _source_port(0) , _capture_transition_buf(0) , _last_flush_frame(0) { in_set_state = true; init (Recordable); if (set_state (node)) { in_set_state = false; throw failed_constructor(); } in_set_state = false; if (destructive()) { use_destructive_playlist (); } } void MidiDiskstream::init (Diskstream::Flag f) { Diskstream::init(f); /* there are no channels at this point, so these two calls just get speed_buffer_size and wrap_buffer size setup without duplicating their code. */ set_block_size (_session.get_block_size()); allocate_temporary_buffers (); _playback_buf = new MidiRingBuffer (_session.diskstream_buffer_size()); _capture_buf = new MidiRingBuffer (_session.diskstream_buffer_size()); _capture_transition_buf = new RingBufferNPT (128); _n_channels = ChanCount(DataType::MIDI, 1); assert(recordable()); } MidiDiskstream::~MidiDiskstream () { Glib::Mutex::Lock lm (state_lock); } void MidiDiskstream::non_realtime_input_change () { { Glib::Mutex::Lock lm (state_lock); if (input_change_pending == NoChange) { return; } if (input_change_pending & ConfigurationChanged) { assert(_io->n_inputs() == _n_channels); } get_input_sources (); set_capture_offset (); if (first_input_change) { set_align_style (_persistent_alignment_style); first_input_change = false; } else { set_align_style_from_io (); } input_change_pending = NoChange; /* implicit unlock */ } /* reset capture files */ reset_write_sources (false); /* now refill channel buffers */ if (speed() != 1.0f || speed() != -1.0f) { seek ((nframes_t) (_session.transport_frame() * (double) speed())); } else { seek (_session.transport_frame()); } _last_flush_frame = _session.transport_frame(); } void MidiDiskstream::get_input_sources () { uint32_t ni = _io->n_inputs().n_midi(); if (ni == 0) { return; } // This is all we do for now at least assert(ni == 1); _source_port = _io->midi_input(0); /* I don't get it.... const char **connections = _io->input(0)->get_connections (); if (connections == 0 || connections[0] == 0) { if (_source_port) { // _source_port->disable_metering (); } _source_port = 0; } else { _source_port = dynamic_cast( _session.engine().get_port_by_name (connections[0]) ); } if (connections) { free (connections); }*/ } int MidiDiskstream::find_and_use_playlist (const string& name) { boost::shared_ptr playlist; if ((playlist = boost::dynamic_pointer_cast (_session.playlist_by_name (name))) == 0) { playlist = boost::dynamic_pointer_cast (PlaylistFactory::create (DataType::MIDI, _session, name)); } if (!playlist) { error << string_compose(_("MidiDiskstream: Playlist \"%1\" isn't an midi playlist"), name) << endmsg; return -1; } return use_playlist (playlist); } int MidiDiskstream::use_playlist (boost::shared_ptr playlist) { assert(boost::dynamic_pointer_cast(playlist)); Diskstream::use_playlist(playlist); return 0; } int MidiDiskstream::use_new_playlist () { string newname; boost::shared_ptr playlist; if (!in_set_state && destructive()) { return 0; } if (_playlist) { newname = Playlist::bump_name (_playlist->name(), _session); } else { newname = Playlist::bump_name (_name, _session); } if ((playlist = boost::dynamic_pointer_cast (PlaylistFactory::create ( DataType::MIDI, _session, newname, hidden()))) != 0) { playlist->set_orig_diskstream_id (id()); return use_playlist (playlist); } else { return -1; } } int MidiDiskstream::use_copy_playlist () { assert(midi_playlist()); if (destructive()) { return 0; } if (_playlist == 0) { error << string_compose(_("MidiDiskstream %1: there is no existing playlist to make a copy of!"), _name) << endmsg; return -1; } string newname; boost::shared_ptr playlist; newname = Playlist::bump_name (_playlist->name(), _session); if ((playlist = boost::dynamic_pointer_cast(PlaylistFactory::create (midi_playlist(), newname))) != 0) { playlist->set_orig_diskstream_id (id()); return use_playlist (playlist); } else { return -1; } } /** Overloaded from parent to die horribly */ int MidiDiskstream::set_destructive (bool yn) { assert( ! destructive()); assert( ! yn); return -1; } void MidiDiskstream::check_record_status (nframes_t transport_frame, nframes_t nframes, bool can_record) { // FIXME: waaay too much code to duplicate (AudioDiskstream) int possibly_recording; int rolling; int change; const int transport_rolling = 0x4; const int track_rec_enabled = 0x2; const int global_rec_enabled = 0x1; /* merge together the 3 factors that affect record status, and compute what has changed. */ rolling = _session.transport_speed() != 0.0f; possibly_recording = (rolling << 2) | (record_enabled() << 1) | can_record; change = possibly_recording ^ last_possibly_recording; if (possibly_recording == last_possibly_recording) { return; } /* change state */ /* if per-track or global rec-enable turned on while the other was already on, we've started recording */ if ((change & track_rec_enabled) && record_enabled() && (!(change & global_rec_enabled) && can_record) || ((change & global_rec_enabled) && can_record && (!(change & track_rec_enabled) && record_enabled()))) { /* starting to record: compute first+last frames */ first_recordable_frame = transport_frame + _capture_offset; last_recordable_frame = max_frames; capture_start_frame = transport_frame; if (!(last_possibly_recording & transport_rolling) && (possibly_recording & transport_rolling)) { /* was stopped, now rolling (and recording) */ if (_alignment_style == ExistingMaterial) { first_recordable_frame += _session.worst_output_latency(); } else { first_recordable_frame += _roll_delay; } } else { /* was rolling, but record state changed */ if (_alignment_style == ExistingMaterial) { if (!Config->get_punch_in()) { /* manual punch in happens at the correct transport frame because the user hit a button. but to get alignment correct we have to back up the position of the new region to the appropriate spot given the roll delay. */ capture_start_frame -= _roll_delay; /* XXX paul notes (august 2005): i don't know why this is needed. */ first_recordable_frame += _capture_offset; } else { /* autopunch toggles recording at the precise transport frame, and then the DS waits to start recording for a time that depends on the output latency. */ first_recordable_frame += _session.worst_output_latency(); } } else { if (Config->get_punch_in()) { first_recordable_frame += _roll_delay; } else { capture_start_frame -= _roll_delay; } } } if (_flags & Recordable) { RingBufferNPT::rw_vector transvec; _capture_transition_buf->get_write_vector(&transvec); if (transvec.len[0] > 0) { transvec.buf[0]->type = CaptureStart; transvec.buf[0]->capture_val = capture_start_frame; _capture_transition_buf->increment_write_ptr(1); } else { // bad! fatal << X_("programming error: capture_transition_buf is full on rec start! inconceivable!") << endmsg; } } } else if (!record_enabled() || !can_record) { /* stop recording */ last_recordable_frame = transport_frame + _capture_offset; if (_alignment_style == ExistingMaterial) { last_recordable_frame += _session.worst_output_latency(); } else { last_recordable_frame += _roll_delay; } } last_possibly_recording = possibly_recording; } int MidiDiskstream::process (nframes_t transport_frame, nframes_t nframes, nframes_t offset, bool can_record, bool rec_monitors_input) { // FIXME: waay too much code to duplicate (AudioDiskstream::process) int ret = -1; nframes_t rec_offset = 0; nframes_t rec_nframes = 0; bool nominally_recording; bool re = record_enabled (); bool collect_playback = false; /* if we've already processed the frames corresponding to this call, just return. this allows multiple routes that are taking input from this diskstream to call our ::process() method, but have this stuff only happen once. more commonly, it allows both the AudioTrack that is using this AudioDiskstream *and* the Session to call process() without problems. */ if (_processed) { return 0; } commit_should_unlock = false; check_record_status (transport_frame, nframes, can_record); nominally_recording = (can_record && re); if (nframes == 0) { _processed = true; return 0; } /* This lock is held until the end of AudioDiskstream::commit, so these two functions must always be called as a pair. The only exception is if this function returns a non-zero value, in which case, ::commit should not be called. */ // If we can't take the state lock return. if (!state_lock.trylock()) { return 1; } commit_should_unlock = true; adjust_capture_position = 0; if (nominally_recording || (_session.get_record_enabled() && Config->get_punch_in())) { OverlapType ot; ot = coverage (first_recordable_frame, last_recordable_frame, transport_frame, transport_frame + nframes); switch (ot) { case OverlapNone: rec_nframes = 0; break; case OverlapInternal: /* ---------- recrange |---| transrange */ rec_nframes = nframes; rec_offset = 0; break; case OverlapStart: /* |--------| recrange -----| transrange */ rec_nframes = transport_frame + nframes - first_recordable_frame; if (rec_nframes) { rec_offset = first_recordable_frame - transport_frame; } break; case OverlapEnd: /* |--------| recrange |-------- transrange */ rec_nframes = last_recordable_frame - transport_frame; rec_offset = 0; break; case OverlapExternal: /* |--------| recrange -------------- transrange */ rec_nframes = last_recordable_frame - last_recordable_frame; rec_offset = first_recordable_frame - transport_frame; break; } if (rec_nframes && !was_recording) { capture_captured = 0; was_recording = true; } } if (can_record && !_last_capture_regions.empty()) { _last_capture_regions.clear (); } if (nominally_recording || rec_nframes) { assert(_source_port); // Pump entire port buffer into the ring buffer (FIXME: split cycles?) //_capture_buf->write(_source_port->get_midi_buffer(), transport_frame); size_t num_events = _source_port->get_midi_buffer().size(); size_t to_write = std::min(_capture_buf->write_space(), num_events); for (size_t i=0; i < to_write; ++i) { MidiEvent& ev = _source_port->get_midi_buffer()[i]; _capture_buf->write(ev.time + transport_frame, ev.size, ev.buffer); } } else { if (was_recording) { finish_capture (rec_monitors_input); } } if (rec_nframes) { /* XXX XXX XXX XXX XXX XXX XXX XXX */ /* data will be written to disk */ if (rec_nframes == nframes && rec_offset == 0) { playback_distance = nframes; } else { collect_playback = true; } adjust_capture_position = rec_nframes; } else if (nominally_recording) { /* can't do actual capture yet - waiting for latency effects to finish before we start*/ playback_distance = nframes; } else { collect_playback = true; } if (collect_playback) { /* we're doing playback */ nframes_t necessary_samples; /* no varispeed playback if we're recording, because the output .... TBD */ if (rec_nframes == 0 && _actual_speed != 1.0f) { necessary_samples = (nframes_t) floor ((nframes * fabs (_actual_speed))) + 1; } else { necessary_samples = nframes; } // XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX // Write into playback buffer here, and whatnot? cerr << "MDS FIXME: collect playback" << endl; } ret = 0; _processed = true; if (ret) { /* we're exiting with failure, so ::commit will not be called. unlock the state lock. */ commit_should_unlock = false; state_lock.unlock(); } return ret; } bool MidiDiskstream::commit (nframes_t nframes) { bool need_butler = false; if (_actual_speed < 0.0) { playback_sample -= playback_distance; } else { playback_sample += playback_distance; } if (adjust_capture_position != 0) { capture_captured += adjust_capture_position; adjust_capture_position = 0; } if (_slaved) { need_butler = _playback_buf->write_space() >= _playback_buf->capacity() / 2; } else { need_butler = _playback_buf->write_space() >= disk_io_chunk_frames || _capture_buf->read_space() >= disk_io_chunk_frames; } if (commit_should_unlock) { state_lock.unlock(); } _processed = false; return need_butler; } void MidiDiskstream::set_pending_overwrite (bool yn) { /* called from audio thread, so we can use the read ptr and playback sample as we wish */ pending_overwrite = yn; overwrite_frame = playback_sample; //overwrite_offset = channels.front().playback_buf->get_read_ptr(); } int MidiDiskstream::overwrite_existing_buffers () { return 0; } int MidiDiskstream::seek (nframes_t frame, bool complete_refill) { Glib::Mutex::Lock lm (state_lock); int ret = -1; _playback_buf->reset(); _capture_buf->reset(); playback_sample = frame; file_frame = frame; if (complete_refill) { while ((ret = do_refill_with_alloc ()) > 0) ; } else { ret = do_refill_with_alloc (); } return ret; } int MidiDiskstream::can_internal_playback_seek (nframes_t distance) { if (_playback_buf->read_space() < distance) { return false; } else { return true; } } int MidiDiskstream::internal_playback_seek (nframes_t distance) { first_recordable_frame += distance; playback_sample += distance; return 0; } /** @a start is set to the new frame position (TIME) read up to */ int MidiDiskstream::read (nframes_t& start, nframes_t dur, bool reversed) { nframes_t this_read = 0; bool reloop = false; nframes_t loop_end = 0; nframes_t loop_start = 0; nframes_t loop_length = 0; Location *loc = 0; if (!reversed) { /* Make the use of a Location atomic for this read operation. Note: Locations don't get deleted, so all we care about when I say "atomic" is that we are always pointing to the same one and using a start/length values obtained just once. */ if ((loc = loop_location) != 0) { loop_start = loc->start(); loop_end = loc->end(); loop_length = loop_end - loop_start; } /* if we are looping, ensure that the first frame we read is at the correct position within the loop. */ if (loc && start >= loop_end) { //cerr << "start adjusted from " << start; start = loop_start + ((start - loop_start) % loop_length); //cerr << "to " << start << endl; } //cerr << "start is " << start << " loopstart: " << loop_start << " loopend: " << loop_end << endl; } while (dur) { /* take any loop into account. we can't read past the end of the loop. */ if (loc && (loop_end - start < dur)) { this_read = loop_end - start; //cerr << "reloop true: thisread: " << this_read << " dur: " << dur << endl; reloop = true; } else { reloop = false; this_read = dur; } if (this_read == 0) { break; } this_read = min(dur,this_read); if (midi_playlist()->read (*_playback_buf, start, this_read) != this_read) { error << string_compose(_("MidiDiskstream %1: cannot read %2 from playlist at frame %3"), _id, this_read, start) << endmsg; return -1; } _read_data_count = _playlist->read_data_count(); if (reversed) { // Swap note ons with note offs here. etc? // Fully reversing MIDI required look-ahead (well, behind) to find previous // CC values etc. hard. } else { /* if we read to the end of the loop, go back to the beginning */ if (reloop) { start = loop_start; } else { start += this_read; } } dur -= this_read; //offset += this_read; } return 0; } int MidiDiskstream::do_refill_with_alloc () { return do_refill(); } int MidiDiskstream::do_refill () { int32_t ret = 0; size_t write_space = _playback_buf->write_space(); bool reversed = (_visible_speed * _session.transport_speed()) < 0.0f; if (write_space == 0) { return 0; } /* if there are 2+ chunks of disk i/o possible for this track, let the caller know so that it can arrange for us to be called again, ASAP. */ // FIXME: using disk_io_chunk_frames as an event count, not good // count vs duration semantic differences are nonexistant for audio, // which makes translating for MIDI code confusing... if (_playback_buf->write_space() >= (_slaved?3:2) * disk_io_chunk_frames) { ret = 1; } /* if we're running close to normal speed and there isn't enough space to do disk_io_chunk_frames of I/O, then don't bother. at higher speeds, just do it because the sync between butler and audio thread may not be good enough. */ if ((write_space < disk_io_chunk_frames) && fabs (_actual_speed) < 2.0f) { cerr << "No refill 1\n"; return 0; } /* when slaved, don't try to get too close to the read pointer. this leaves space for the buffer reversal to have something useful to work with. */ if (_slaved && write_space < (_playback_buf->capacity() / 2)) { cerr << "No refill 2\n"; return 0; } if (reversed) { cerr << "No refill 3 (reverse)\n"; return 0; } if (file_frame == max_frames) { //cerr << "No refill 4 (EOF)\n"; /* at end: nothing to do */ return 0; } #if 0 // or this if (file_frame > max_frames - total_space) { /* to close to the end: read what we can, and zero fill the rest */ zero_fill = total_space - (max_frames - file_frame); total_space = max_frames - file_frame; } else { zero_fill = 0; } #endif // At this point we: assert(_playback_buf->write_space() > 0); // ... have something to write to, and assert(file_frame <= max_frames); // ... something to write // So (read it, then) write it: nframes_t file_frame_tmp = file_frame; nframes_t to_read = min(disk_io_chunk_frames, (max_frames - file_frame)); // FIXME: read count? if (read (file_frame_tmp, to_read, reversed)) { ret = -1; goto out; } file_frame = file_frame_tmp; out: return ret; } /** Flush pending data to disk. * * Important note: this function will write *AT MOST* disk_io_chunk_frames * of data to disk. it will never write more than that. If it writes that * much and there is more than that waiting to be written, it will return 1, * otherwise 0 on success or -1 on failure. * * If there is less than disk_io_chunk_frames to be written, no data will be * written at all unless @a force_flush is true. */ int MidiDiskstream::do_flush (Session::RunContext context, bool force_flush) { uint32_t to_write; int32_t ret = 0; // FIXME: I'd be lying if I said I knew what this thing was //RingBufferNPT::rw_vector transvec; nframes_t total; _write_data_count = 0; if (_last_flush_frame > _session.transport_frame() || _last_flush_frame < capture_start_frame) { _last_flush_frame = _session.transport_frame(); } total = _session.transport_frame() - _last_flush_frame; if (total == 0 || _capture_buf->read_space() == 0 && _session.transport_speed() == 0 || (total < disk_io_chunk_frames && !force_flush && was_recording)) { goto out; } /* if there are 2+ chunks of disk i/o possible for this track, let the caller know so that it can arrange for us to be called again, ASAP. if we are forcing a flush, then if there is* any* extra work, let the caller know. if we are no longer recording and there is any extra work, let the caller know too. */ if (total >= 2 * disk_io_chunk_frames || ((force_flush || !was_recording) && total > disk_io_chunk_frames)) { ret = 1; } //to_write = min (disk_io_chunk_frames, (nframes_t) vector.len[0]); to_write = disk_io_chunk_frames; assert(!destructive()); if (record_enabled() && _session.transport_frame() - _last_flush_frame > disk_io_chunk_frames) { if ((!_write_source) || _write_source->write (*_capture_buf, to_write) != to_write) { error << string_compose(_("MidiDiskstream %1: cannot write to disk"), _id) << endmsg; return -1; } else { _last_flush_frame = _session.transport_frame(); } } out: //return ret; return 0; // FIXME: everything's fine! always! honest! } void MidiDiskstream::transport_stopped (struct tm& when, time_t twhen, bool abort_capture) { uint32_t buffer_position; bool more_work = true; int err = 0; boost::shared_ptr region; nframes_t total_capture; MidiRegion::SourceList srcs; MidiRegion::SourceList::iterator src; vector::iterator ci; bool mark_write_completed = false; finish_capture (true); /* butler is already stopped, but there may be work to do to flush remaining data to disk. */ while (more_work && !err) { switch (do_flush (Session::TransportContext, true)) { case 0: more_work = false; break; case 1: break; case -1: error << string_compose(_("MidiDiskstream \"%1\": cannot flush captured data to disk!"), _name) << endmsg; err++; } } /* XXX is there anything we can do if err != 0 ? */ Glib::Mutex::Lock lm (capture_info_lock); if (capture_info.empty()) { return; } if (abort_capture) { if (_write_source) { _write_source->mark_for_remove (); _write_source->drop_references (); _write_source.reset(); } /* new source set up in "out" below */ } else { assert(_write_source); for (total_capture = 0, ci = capture_info.begin(); ci != capture_info.end(); ++ci) { total_capture += (*ci)->frames; } /* figure out the name for this take */ srcs.push_back (_write_source); _write_source->update_header (capture_info.front()->start, when, twhen); _write_source->set_captured_for (_name); string whole_file_region_name; whole_file_region_name = region_name_from_path (_write_source->name(), true); /* Register a new region with the Session that describes the entire source. Do this first so that any sub-regions will obviously be children of this one (later!) */ try { boost::shared_ptr rx (RegionFactory::create (srcs, _write_source->last_capture_start_frame(), total_capture, whole_file_region_name, 0, Region::Flag (Region::DefaultFlags|Region::Automatic|Region::WholeFile))); region = boost::dynamic_pointer_cast (rx); region->special_set_position (capture_info.front()->start); } catch (failed_constructor& err) { error << string_compose(_("%1: could not create region for complete midi file"), _name) << endmsg; /* XXX what now? */ } _last_capture_regions.push_back (region); // cerr << _name << ": there are " << capture_info.size() << " capture_info records\n"; XMLNode &before = _playlist->get_state(); _playlist->freeze (); for (buffer_position = _write_source->last_capture_start_frame(), ci = capture_info.begin(); ci != capture_info.end(); ++ci) { string region_name; _session.region_name (region_name, _write_source->name(), false); // cerr << _name << ": based on ci of " << (*ci)->start << " for " << (*ci)->frames << " add a region\n"; try { boost::shared_ptr rx (RegionFactory::create (srcs, buffer_position, (*ci)->frames, region_name)); region = boost::dynamic_pointer_cast (rx); } catch (failed_constructor& err) { error << _("MidiDiskstream: could not create region for captured midi!") << endmsg; continue; /* XXX is this OK? */ } region->GoingAway.connect (bind (mem_fun (*this, &Diskstream::remove_region_from_last_capture), boost::weak_ptr(region))); _last_capture_regions.push_back (region); // cerr << "add new region, buffer position = " << buffer_position << " @ " << (*ci)->start << endl; i_am_the_modifier++; _playlist->add_region (region, (*ci)->start); i_am_the_modifier--; buffer_position += (*ci)->frames; } _playlist->thaw (); XMLNode &after = _playlist->get_state(); _session.add_command (new MementoCommand(*_playlist, &before, &after)); } mark_write_completed = true; reset_write_sources (mark_write_completed); for (ci = capture_info.begin(); ci != capture_info.end(); ++ci) { delete *ci; } capture_info.clear (); capture_start_frame = 0; } void MidiDiskstream::transport_looped (nframes_t transport_frame) { if (was_recording) { // adjust the capture length knowing that the data will be recorded to disk // only necessary after the first loop where we're recording if (capture_info.size() == 0) { capture_captured += _capture_offset; if (_alignment_style == ExistingMaterial) { capture_captured += _session.worst_output_latency(); } else { capture_captured += _roll_delay; } } finish_capture (true); // the next region will start recording via the normal mechanism // we'll set the start position to the current transport pos // no latency adjustment or capture offset needs to be made, as that already happened the first time capture_start_frame = transport_frame; first_recordable_frame = transport_frame; // mild lie last_recordable_frame = max_frames; was_recording = true; } } void MidiDiskstream::finish_capture (bool rec_monitors_input) { was_recording = false; if (capture_captured == 0) { return; } // Why must we destroy? assert(!destructive()); CaptureInfo* ci = new CaptureInfo; ci->start = capture_start_frame; ci->frames = capture_captured; /* XXX theoretical race condition here. Need atomic exchange ? However, the circumstances when this is called right now (either on record-disable or transport_stopped) mean that no actual race exists. I think ... We now have a capture_info_lock, but it is only to be used to synchronize in the transport_stop and the capture info accessors, so that invalidation will not occur (both non-realtime). */ // cerr << "Finish capture, add new CI, " << ci->start << '+' << ci->frames << endl; capture_info.push_back (ci); capture_captured = 0; } void MidiDiskstream::set_record_enabled (bool yn) { if (!recordable() || !_session.record_enabling_legal()) { return; } assert(!destructive()); if (yn && _source_port == 0) { /* pick up connections not initiated *from* the IO object we're associated with. */ get_input_sources (); } /* yes, i know that this not proof against race conditions, but its good enough. i think. */ if (record_enabled() != yn) { if (yn) { engage_record_enable (); } else { disengage_record_enable (); } } } void MidiDiskstream::engage_record_enable () { bool rolling = _session.transport_speed() != 0.0f; g_atomic_int_set (&_record_enabled, 1); if (_source_port && Config->get_monitoring_model() == HardwareMonitoring) { _source_port->request_monitor_input (!(Config->get_auto_input() && rolling)); } RecordEnableChanged (); /* EMIT SIGNAL */ } void MidiDiskstream::disengage_record_enable () { g_atomic_int_set (&_record_enabled, 0); if (_source_port && Config->get_monitoring_model() == HardwareMonitoring) { if (_source_port) { _source_port->request_monitor_input (false); } } RecordEnableChanged (); /* EMIT SIGNAL */ } XMLNode& MidiDiskstream::get_state () { XMLNode* node = new XMLNode ("MidiDiskstream"); char buf[64]; LocaleGuard lg (X_("POSIX")); snprintf (buf, sizeof(buf), "0x%x", _flags); node->add_property ("flags", buf); node->add_property ("playlist", _playlist->name()); snprintf (buf, sizeof(buf), "%f", _visible_speed); node->add_property ("speed", buf); node->add_property("name", _name); id().print(buf, sizeof(buf)); node->add_property("id", buf); if (_write_source && _session.get_record_enabled()) { XMLNode* cs_child = new XMLNode (X_("CapturingSources")); XMLNode* cs_grandchild; cs_grandchild = new XMLNode (X_("file")); cs_grandchild->add_property (X_("path"), _write_source->path()); cs_child->add_child_nocopy (*cs_grandchild); /* store the location where capture will start */ Location* pi; if (Config->get_punch_in() && ((pi = _session.locations()->auto_punch_location()) != 0)) { snprintf (buf, sizeof (buf), "%" PRIu32, pi->start()); } else { snprintf (buf, sizeof (buf), "%" PRIu32, _session.transport_frame()); } cs_child->add_property (X_("at"), buf); node->add_child_nocopy (*cs_child); } if (_extra_xml) { node->add_child_copy (*_extra_xml); } return* node; } int MidiDiskstream::set_state (const XMLNode& node) { const XMLProperty* prop; XMLNodeList nlist = node.children(); XMLNodeIterator niter; uint32_t nchans = 1; XMLNode* capture_pending_node = 0; LocaleGuard lg (X_("POSIX")); in_set_state = true; for (niter = nlist.begin(); niter != nlist.end(); ++niter) { /*if ((*niter)->name() == IO::state_node_name) { deprecated_io_node = new XMLNode (**niter); }*/ assert ((*niter)->name() != IO::state_node_name); if ((*niter)->name() == X_("CapturingSources")) { capture_pending_node = *niter; } } /* prevent write sources from being created */ in_set_state = true; if ((prop = node.property ("name")) != 0) { _name = prop->value(); } if ((prop = node.property ("id")) != 0) { _id = prop->value (); } if ((prop = node.property ("flags")) != 0) { _flags = Flag (string_2_enum (prop->value(), _flags)); } if ((prop = node.property ("channels")) != 0) { nchans = atoi (prop->value().c_str()); } if ((prop = node.property ("playlist")) == 0) { return -1; } { bool had_playlist = (_playlist != 0); if (find_and_use_playlist (prop->value())) { return -1; } if (!had_playlist) { _playlist->set_orig_diskstream_id (_id); } if (capture_pending_node) { use_pending_capture_data (*capture_pending_node); } } if ((prop = node.property ("speed")) != 0) { double sp = atof (prop->value().c_str()); if (realtime_set_speed (sp, false)) { non_realtime_set_speed (); } } in_set_state = false; /* make sure this is clear before we do anything else */ // FIXME? //_capturing_source = 0; /* write sources are handled when we handle the input set up of the IO that owns this DS (::non_realtime_input_change()) */ in_set_state = false; return 0; } int MidiDiskstream::use_new_write_source (uint32_t n) { if (!recordable()) { return 1; } assert(n == 0); if (_write_source) { if (SMFSource::is_empty (_write_source->path())) { _write_source->mark_for_remove (); _write_source.reset(); } else { _write_source.reset(); } } try { _write_source = boost::dynamic_pointer_cast(_session.create_midi_source_for_session (*this)); if (!_write_source) { throw failed_constructor(); } } catch (failed_constructor &err) { error << string_compose (_("%1:%2 new capture file not initialized correctly"), _name, n) << endmsg; _write_source.reset(); return -1; } _write_source->set_allow_remove_if_empty (true); return 0; } void MidiDiskstream::reset_write_sources (bool mark_write_complete, bool force) { if (!recordable()) { return; } if (_write_source && mark_write_complete) { _write_source->mark_streaming_write_completed (); } use_new_write_source (0); if (record_enabled()) { //_capturing_sources.push_back (_write_source); } } int MidiDiskstream::rename_write_sources () { if (_write_source != 0) { _write_source->set_source_name (_name, destructive()); /* XXX what to do if this fails ? */ } return 0; } void MidiDiskstream::set_block_size (nframes_t nframes) { } void MidiDiskstream::allocate_temporary_buffers () { } void MidiDiskstream::monitor_input (bool yn) { if (_source_port) _source_port->request_monitor_input (yn); else cerr << "MidiDiskstream NO SOURCE PORT TO MONITOR\n"; } void MidiDiskstream::set_align_style_from_io () { bool have_physical = false; if (_io == 0) { return; } get_input_sources (); if (_source_port && _source_port->flags() & JackPortIsPhysical) { have_physical = true; } if (have_physical) { set_align_style (ExistingMaterial); } else { set_align_style (CaptureTime); } } float MidiDiskstream::playback_buffer_load () const { return (float) ((double) _playback_buf->read_space()/ (double) _playback_buf->capacity()); } float MidiDiskstream::capture_buffer_load () const { return (float) ((double) _capture_buf->write_space()/ (double) _capture_buf->capacity()); } int MidiDiskstream::use_pending_capture_data (XMLNode& node) { return 0; } /** Writes playback events in the given range to \a dst, translating time stamps * so that an event at \a start has time = 0 */ void MidiDiskstream::get_playback(MidiBuffer& dst, nframes_t start, nframes_t end) { dst.clear(); assert(dst.size() == 0); // I think this happens with reverse varispeed? maybe? if (end <= start) { cerr << "MDS: Reverse? Skipping" << endl; return; } // Translates stamps to be relative to start _playback_buf->read(dst, start, end); }