Formatting changes to mackie.xml as a result of running make format

git-svn-id: svn://localhost/ardour2/trunk@1621 d708f5d6-7413-0410-9779-e7cbd77b26cf

1 files changed, 196 insertions, 175 deletions

diff --git a/manual/xml/mackie.xml b/manual/xml/mackie.xml
index 6917b261c2..e02158f6f3 100644
--- a/manual/xml/mackie.xml
+++ b/manual/xml/mackie.xml
@@ -8,16 +8,18 @@
   <title>Using the Mackie driver for MCU and BCF2000</title>
   <para>
     This will walk you through the process of configuring and using Mackie
-		MCU, or a BCF2000 in <ulink url="http://www.behringerdownload.de/BCF2000/BCF2000_Emulation_modes.pdf">Logic Control emulation mode</ulink>.
+    MCU, or a BCF2000 in
+    <ulink url="http://www.behringerdownload.de/BCF2000/BCF2000_Emulation_modes.pdf">Logic
+    Control emulation mode</ulink>.
   </para>
 
   <section id="mackie-connecting-device">
     <title>Connecting Device</title>
     <para>
-      Make sure your surface is connected and you know which <filename>/dev/snd/midi</filename>
-			entry belongs to the device. You can do this by saying
-			<command>cat /proc/asound/cards</command>
-			which should result in something like
+      Make sure your surface is connected and you know which
+      <filename>/dev/snd/midi</filename> entry belongs to the device. You
+      can do this by saying <command>cat /proc/asound/cards</command> which
+      should result in something like
 <screen>
  0 [EWS88MT        ]: ICE1712 - TerraTec EWS88MT
                       TerraTec EWS88MT at 0x1140, irq 21
@@ -26,198 +28,217 @@
  2 [BCF2000        ]: USB-Audio - BCF2000
                       BEHRINGER BCF2000 at usb-0000:00:1a.1-1, full speed
 </screen>
-			in this case the BCF2000 is on <filename>/dev/snd/midiC2D0</filename>.
-		</para>
+      in this case the BCF2000 is on <filename>/dev/snd/midiC2D0</filename>.
+    </para>
+
     <para>
-      While ardour is not running, edit your <filename>.ardour2/ardour.rc</filename> and add at the top, with
-			the other ports:
+      While ardour is not running, edit your
+      <filename>.ardour2/ardour.rc</filename> and add at the top, with the
+      other ports:
 <programlisting>
 &lt;MIDI-port tag="mcu" device="/dev/snd/midiC2D0" type="alsa/raw" mode="duplex"/&gt;
 </programlisting>
-			If you have a BCF2000, and you'd like to use <link linkend="mackie-bcf-mode">BCF mode</link>,
-			you can also add under the &lt;Config&gt; tag:
+      If you have a BCF2000, and you'd like to use
+      <link linkend="mackie-bcf-mode">BCF mode</link>, you can also add
+      under the &lt;Config&gt; tag:
 <programlisting>
 &lt;Option name="mackie-emulation" value="bcf"/&gt;
 </programlisting>
-			
     </para>
-		<para>
-			It is also possible to add MCU extenders, although this is untested
-			because nobody we know has access to one right now. To do this, add
-			the following lines to <filename>~/.ardour2/ardour.rc</filename>
+
+    <para>
+      It is also possible to add MCU extenders, although this is untested
+      because nobody we know has access to one right now. To do this, add
+      the following lines to <filename>~/.ardour2/ardour.rc</filename>
 <programlisting>
 &lt;MIDI-port tag="mcu_xt_1" device="/dev/snd/midiC3D0" type="alsa/raw" mode="duplex"/&gt;
 &lt;MIDI-port tag="mcu_xt_2" device="/dev/snd/midiC4D0" type="alsa/raw" mode="duplex"/&gt;
 </programlisting>
-			and so on, one for each of your extenders, up to a maximum of 9 extenders.
-		</para>
+      and so on, one for each of your extenders, up to a maximum of 9
+      extenders.
+    </para>
   </section>
 
   <section id="mackie-connecting-to-ardour">
     <title>Connecting to Ardour</title>
     <para>
-      Start up ardour. Go to Options/Control Surfaces. You should see "Mackie"
-			as one of the menu items. Turn it on. The faders on the surface should
-			jump to the correct positions. The mackie should work as normal, except
-			that any buttons not on the BCF won't work.
+      Start up ardour. Go to Options/Control Surfaces. You should see
+      "Mackie" as one of the menu items. Turn it on. The faders on the
+      surface should jump to the correct positions. The mackie should work
+      as normal, except that any buttons not on the BCF won't work.
     </para>
-	</section>
+  </section>
 
   <section id="mackie-bcf-mode">
     <title>BCF mode</title>
-		<para>
-	    <itemizedlist>
-				<listitem>
-					<para>
-						7 of the 8 sliders are used as route sliders, the
-						remaining right-hand one is used for the master slider
-					</para>
-				</listitem>
-				<listitem>
-					<para>
-						certain buttons have been remapped from the default Behringer
-						settings, which required either both hands, or one-handed contortions
-						to do simple things like rec-enable or mute a track.
-					</para>
-				</listitem>
-				<listitem>
-					<para>
-						The display shows the number of the first switched-in bank
-						or Ar if the first bank is in place.
-					</para>
-				</listitem>
-			</itemizedlist>
-		</para>
-		
-		<para>
-		BCF mode bindings
-		<table id="tbl-mackie-bcf-key-bindings">
-			<title>BCF mode bindings</title>
-			<tgroup cols = "4">
-				<colspec colnum="1" colname="Strip" colwidth="1"/>
-				<colspec colnum="2" colname="Master Strip" colwidth= "1"/>
-				<colspec colnum="3" colname="Buttons 1" colwidth="1"/>
-				<colspec colnum="4" colname="Buttons 2" colwidth= "1"/>
-				<thead>
-					<row>
-						<entry>
-							Strips 1-7
-						</entry>
-						<entry>
-							Master Strip
-						</entry>
-						<entry namest="Buttons 1" nameend="Buttons 2">
-							Buttons
-						</entry>
-					</row>
-				</thead>
-				<tbody>
-					<row>
-						<entry>
-							pan / solo if pressed
-						</entry>
-						<entry>
-							transport
-							<footnote>
-								<para>
-									Making a pot pretend to be a shuttle wheel doesn't work very well.
-								</para>
-							</footnote>
-							/ nothing
-						</entry>
-						<entry namest="Buttons 1" nameend="Buttons 2">
-							LCD display
-						</entry>
-					</row>
-					
-					<row>
-						<entry>
-							mute
-						</entry>
-						<entry>
-							mute
-						</entry>
-						<entry>
-							shift 1
-						</entry>
-						<entry>
-							loop
-						</entry>
-					</row>
-
-					<row>
-						<entry>
-							rec
-						</entry>
-						<entry>
-							session rec
-						</entry>
-						<entry>
-							shift 2
-						</entry>
-						<entry>
-							click
-						</entry>
-					</row>
-
-					<row>
-						<entry morerows="4" valign="middle">
-							slider
-						</entry>
-						<entry morerows="4" valign="middle">
-							slider
-						</entry>
-						<entry>
-							punch in
-						</entry>
-						<entry>
-							punch out
-						</entry>
-					</row>
-
-					<row>
-						<entry>
-							home
-						</entry>
-						<entry>
-							end
-						</entry>
-					</row>
-
-					<row>
-						<entry>
-							previous bank
-							(shift 1 is previous route)
-						</entry>
-						<entry>
-							next bank
-							(shift 1 is next route)
-						</entry>
-					</row>
-
-					<row>
-						<entry>
-							previous marker
-						</entry>
-						<entry>
-							next marker
-						</entry>
-					</row>
-
-					<row>
-						<entry>
-							stop
-						</entry>
-						<entry>
-							play
-						</entry>
-					</row>
-				</tbody>
-			</tgroup>
-		</table>
-		</para>
-	</section>
+    <para>
+      <itemizedlist>
+        <listitem>
+          <para>
+            7 of the 8 sliders are used as route sliders, the remaining
+            right-hand one is used for the master slider
+          </para>
+        </listitem>
+
+        <listitem>
+          <para>
+            certain buttons have been remapped from the default Behringer
+            settings, which required either both hands, or one-handed
+            contortions to do simple things like rec-enable or mute a track.
+          </para>
+        </listitem>
+
+        <listitem>
+          <para>
+            The display shows the number of the first switched-in bank or Ar
+            if the first bank is in place.
+          </para>
+        </listitem>
+      </itemizedlist>
+    </para>
+
+    <para>
+      BCF mode bindings
+      <table id="tbl-mackie-bcf-key-bindings">
+        <title>BCF mode bindings</title>
+        <tgroup cols = "4">
+          <colspec colnum="1" colname="Strip" colwidth="1"/>
+          <colspec colnum="2" colname="Master Strip" colwidth= "1"/>
+          <colspec colnum="3" colname="Buttons 1" colwidth="1"/>
+          <colspec colnum="4" colname="Buttons 2" colwidth= "1"/>
+          <thead>
+            <row>
+              <entry>
+                Strips 1-7
+              </entry>
+
+              <entry>
+                Master Strip
+              </entry>
+
+              <entry namest="Buttons 1" nameend="Buttons 2">
+                Buttons
+              </entry>
+            </row>
+          </thead>
+          <tbody>
+            <row>
+              <entry>
+                pan / solo if pressed
+              </entry>
+
+              <entry>
+                transport <footnote>
+                <para>
+                  Making a pot pretend to be a shuttle wheel doesn't work
+                  very well.
+                </para>
+                </footnote> / nothing
+              </entry>
+
+              <entry namest="Buttons 1" nameend="Buttons 2">
+                LCD display
+              </entry>
+            </row>
+
+            <row>
+              <entry>
+                mute
+              </entry>
+
+              <entry>
+                mute
+              </entry>
+
+              <entry>
+                shift 1
+              </entry>
 
+              <entry>
+                loop
+              </entry>
+            </row>
+
+            <row>
+              <entry>
+                rec
+              </entry>
+
+              <entry>
+                session rec
+              </entry>
+
+              <entry>
+                shift 2
+              </entry>
+
+              <entry>
+                click
+              </entry>
+            </row>
+
+            <row>
+              <entry morerows="4" valign="middle">
+                slider
+              </entry>
+
+              <entry morerows="4" valign="middle">
+                slider
+              </entry>
+
+              <entry>
+                punch in
+              </entry>
+
+              <entry>
+                punch out
+              </entry>
+            </row>
+
+            <row>
+              <entry>
+                home
+              </entry>
+
+              <entry>
+                end
+              </entry>
+            </row>
+
+            <row>
+              <entry>
+                previous bank (shift 1 is previous route)
+              </entry>
+
+              <entry>
+                next bank (shift 1 is next route)
+              </entry>
+            </row>
+
+            <row>
+              <entry>
+                previous marker
+              </entry>
+
+              <entry>
+                next marker
+              </entry>
+            </row>
+
+            <row>
+              <entry>
+                stop
+              </entry>
+
+              <entry>
+                play
+              </entry>
+            </row>
+          </tbody>
+        </tgroup>
+      </table>
+    </para>
+  </section>
 <!--
 	<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" 
 		href="Some_Subsection.xml" />